Diamond Polishing Pads Marble Sandstone
Product introduction:
|
Product Name
|
4inch hot selling machine resin hand refurbishment quartz granite concrete marble stone 3m wet diamond polishing pads |
|
Material
|
diamond+resin
|
|
Color
|
can customized
|
|
Diameter (mm)
|
100(4 inch)
|
|
Hole diameter (mm)
|
15
|
|
Grit
|
50/100/200/400/800/1500/3000
|
|
Thickness(mm)
|
3
|
|
Application
|
Used for grantie,marble,pyroceram,artificial stone, tiles irregular processing
|
|
Package
|
Carton box(or customized)
|
|
Customized service
|
Accept
|
Stone polishing without adding water is called dry polishing, and adding water when polishing is called water polishing.
What's the difference? How to choose?
At present, the mainstream of the market is mainly polishing, mostly made of artificial diamond particles and resin binders. Diamond is often referred to as diamond, and resin, broadly speaking, is a general term for various high molecular polymers that can be used as plastic raw materials.
The polishing of the stone causes friction between the polished sheet and the stone surface, and produces high temperature under the speed and pressure of the machine. This temperature can melt normal resin. Poor quality polishing is prone to deformation.
Stone water polishing adding water can accelerate the heat dissipation, the requirements of the composition of the grinding plate are slightly lower, and when the stone dry polishing has no effect of water, it slowly emits heat, so the resin used by the stone dry polishing plate must choose a high-quality resin that can withstand higher temperatures.
Simply put: due to the composition of the reason, dry grinding can be water polished, ordinary water polished sheet can not be dry polished for a long time, the use of high-quality resin made of polished sheet, can be dry polished or water polished.
When do dry polish?
01
Stone that has not been protected:
The stone without protection is easy to absorb water, and if the stone surface is opened by water grinding, the water absorption of the stone will extend the construction period. Therefore, the stone that has not been protected can be opened by dry polishing and the protective agent can be applied before the protection is applied.
02
Polishing link:
Water polishing is used in stone polishing and polishing optimization. In the polishing process, the light is accelerated by dry polishing. (The specific practice is to use water polishing method to polish to 1000 mesh, stone can add less water or even no water to semi-dry polishing or completely dry polishing, practical application will find that this is a very practical skill to help stone light.)
03
Wall, corner, table:
The wall must be dry ground, because the wall does not have water polishing conditions. Imagine the client's beautiful living room, brand new furniture, and the hand thrower throwing water everywhere...
The finishing work after the polishing of the stone, such as the side of the wall and the place where the large machine can not reach the corner, can be carried out by dry polishing. As well as lines, small area defects, repair countertops, etc., dry polishing is more convenient.
Note:
FAQ
Q:Where is your factory located? How can I visit you?
A: Our factory is located in Quanzhou，Fujian Province,China. You can fly to Jinjiang/Xiamen International Airport and we willpick you up.Welcome you to visit our factory.
Q: How is your quality?
A:We have a very strict control system and 100% QC inspectionbefore shipment.
Q: What should we do if your product can not run well?
A:Give us a detailed report including pictures onsite and products pictures.Then analyze the reason try to find a good way tosolve the problem If it's our problem and not possible to solve.then we will give replacement.
Hot Tags: diamond resin polishing pads polished marble, China diamond resin polishing pads polished marble manufacturers, suppliers, factory
