Stone cutting machine is a common cutting tool, it can be used to cut various types of stone, such as marble, granite, slate, and so on. The equipment is generally composed of a body, a motor, a saw blade, and other parts. The saw blade is a key part of cutting stone and needs to be replaced frequently. Let's introduce how to replace the blade of the saw blade of the stone cutting machine.
Step 1: Turn off the power
Before replacing the saw blade, you first need to turn off the power of the stone cutting machine, so as to avoid accidents. At the same time, you need to pay attention to your own safety when changing the saw blade and wear safety equipment such as gloves and goggles.
Step Two: Remove the Old Saw Blade
Before replacing the old saw blade, the old saw blade needs to be dismantled. Remove the locking screw and remove the saw blade from the saw blade holder, usually, the saw blade will be fixed on the saw blade holder with screws.
Step Three: Clean the Blade Holder and Install a New Blade
After the old saw blade is disassembled, the saw blade bracket needs to be cleaned, and the dust and stains on the saw blade bracket should be removed with a brush or rag. Then choose a new saw blade that fits, making sure it is the same diameter as the old one. Place the new saw blade in its original position and secure it.
Step Four: Test the New Saw Blade
After the new saw blade is installed, it needs to be tested, the power is turned on, the stone cutting machine is turned on, and it is operated for a few minutes to ensure that the new saw blade operates normally without abnormal noise.
Summarize
Replacing the blade of a stone cutting machine saw is not a complicated job, just a few basic steps to follow. During the replacement process, you need to pay attention to safety, turn off the power and wear safety gear when operating. In addition, it is also very important to choose a suitable new saw blade to ensure that it is the same diameter as the original saw blade, so as not to affect the cutting effect. Of course, before replacing the saw blade, the saw blade bracket needs to be cleaned to ensure the service life and efficiency of the saw blade.
