Among all the grinding tools used in construction, angle grinders are one of the most potentially dangerous tools, cutting blades due to fast speed and fragile, so you can often see a variety of news about grinding wheel blades hurting people, which is mainly caused by the quality of cutting blades and improper use.
Never use an angle grinder without protection, which not only helps protect you from flying debris, but also ensures that you do not install out-of-specification grinding wheel blades.
The cutting blade that is too fast will burst, the scattered fragments are enough to seriously injure or fatal, the maximum speed of the cutting blade should match the angle grinder, and personal protective equipment should be worn during operation.
The cutting blade should be selected without deformation, cracks and broken, with a special wrench to firmly install the cutting blade on the angle grinder, start cutting to slow and uniform force, do not progress too fast (too much force), easy to cause the cutting piece to break or break, cutting, if abnormal noise, severe vibration and odor to timely power off shutdown inspection, troubleshoot to avoid accidents.
The fast-rotating cutting blade is no less attractive in the face of various steel and iron blocks, which is a good helper for people's building construction, but the safety of use can not be ignored.
Finally, a reminder that injuries caused by broken cutting blades are common, responsible for themselves, responsible for their families, and the use of angle grinders must be equipped with protective covers.
